Wednesday, June 24, 2009

Break or recover the router password

-Turn the power switch off and back on to recycle the power.

- Press the Break key or key sequence to put the router into ROM Monitor mode. The break key varies by computer or terminal software. The sequence might be CTRL-D, CTRL-Break or another combination.

- At the > prompt, type 0 to record the current value of the configuration register normally 0x2102, or 0x102.

>o

Configuration register = 0x2102 at last boot

Bit# Configuration register option settings:

15 Diagnostic mode disabled.

-Type o/r 0x2142 to tell the router to boot from flash without loading the configuration in NVRAM at the next reload.

-Type i to have the router reboot. The router ignores the configuration in NVRAM.

-The router runs the setup dialog, Type no or press Ctrl-C to skip the initial setup Dialog.

-Type enable ate the Router> prompt to go to privileged exec mode.

-Copy the startup configuration to the running configuration by using the configure memory or copy startup-config running-config commands. Do not type configure terminal. If you use the configure terminal command, you overwrite the configuration stored in NVRAM.

-View the configuration by typing write terminal or show running-config. View the configured line, vty and enable passwords. Any encrypted passwords need to be changed.

-Enter the configuration mode by typing configure terminal. Change the line of enable passwords as necessary.

-All interfaces are in a shutdown state. Issue the no shutdown command on every interface that is to be used.

-Type config-register 0x2102 to return the router to normal operation at the next reloads.

- Exit configuration mode by pressing Ctrl-Z

-Save your changes by typing write memory or copy running-config startup-config.

- Reload the router and verify the passwords.

Tuesday, June 23, 2009

Database Security, Authorization and Encryption rules

Database security is concerned with authorization rules, user-defined procedures, data encryption and authentication schemes etc. Let's have a detailed overview of these concepts:

-Authentication Rules
Authentication rules are restriction on users, applied through DBMS for controlling data access and limiting actions on data. For example, a user can access a database table after giving a valid username and password. Another user can change records in the table but cannot add new records. Senior users are given full authority to take any action with the table. This authorization is applied by DBA according to the sensitivity of data and organizational rules.

-User-Defined Procedures
In addition to the passwords and usernames, users can define their own procedures for security. For example, a user can add some secret questions in the procedure, in order to secure his account. Now, whenever the user logs in, he has to give procedure name along with his password. The procedure will ask the answers of the given secret questions and on submission of correct answers the user is given access to the database.

-Encryption
Data encryption is a technique in which highly sensitive data is encoded (converted into unreadable form) before its storage or transmission over a network. The encoding method is kept tightly protected by the DBMS. The encoded data decoded (reverse process of encoding) for authenticated users only. Thus unauthorized users cannot read data and sensitive data is automatically encoded by DBMS. For example, in ATM system the pin code provided by the customer is encoded (encrypted) before its submission to the database server. A DBA can also manually encrypt data when needed.

-Authentication schemes

Illegal access to computer resources is becoming a serious problem in the modern world. Passwords and usernames cannot identify the actual person who is logging on the computer system. Password can be leaked out or stolen therefore; it is not a secure method to block illegal access. Alternatively, some systems are using other authentication schemes for this purpose. These authentication schemes include signature dynamics, fingerprints and retina prints etc. Smart cards are normally used for the implementation of these schemes. For example, fingerprints are permanently stored on the smart card and whenever user wants to log in, he is required to insert his card into a card reader. He is also required to scan his fingerprints. Now if saved fingerprints on card and his actual fingerprints match with each other he is given access otherwise access is denied.

Monday, June 22, 2009

Tips for uncapping cable modem

ISPs frown on bandwidth hogs, and hackers who uncap cable modem limits with a cable modem un capper or an uncapping machine.
Cable Internet providers and ISPs don't limit bandwidth to make your life miserable (that's what dial-up is for.) They do it to prevent people from running huge bandwidth-hogging Web servers on their cable Internet connections.
In addition, ISPs have a whole network of customers to distribute bandwidth among. It's the same principle as parents giving every kid the same allowance – it's just fair to everyone.
-Uncapping and Docsis
One tutorial on the Internet gives you an uncap cable modem tutorial that includes instructions on how to change Docsis specifications. We won't post the instructions here. Altering Docsis is like backing up in an area with warning signs saying, “Do not back up, severe tire damage.” Uncapping machine, cable modem uncapper, the tool doesn't matter. Your ISP/cable Internet provider monitors Docsis specifications and can look for red flags. Besides, the speed increase will be negligible.
Uncapping=Increase in Bandwidth?
Stealing bandwidth is illegal. The chances that you'll gain insane amounts of bandwidth by using a cable modem uncapper or uncapping machine are negligible, and not worth getting banned from your ISP for life plus jail time. Most high-end servers can only handle 8 Mbps. Hackers on the net may be saying, in ungrammatical posts, “Uncap cable modem, u know u want too,” but you can't enjoy the bandwidth boom from the county jail.
-Uncapping Alternatives
More uncapping cable modem tips:There are many terrific cable modem speed tweaks out there. You can increase your speed and bandwidth without ever needing:
• An uncap cable modem tutorial• A cable modem uncapper• An uncapping machine• A hacker
There are excellent speed optimizer programs for purchase and available as freeware or shareware. Alternately, you can change your computer's settings yourself without needing to do anything to your cable modem.
-OneStep Cable Modem Uncap
OneStep is supposed to be the Arnold Schwarzenegger of cable modem uncapper programs, a lean mean uncapping machine.
The brainchild of shadowy criminals calling themselves “DerEngel” and “Byter,” OneStep sends disgruntled cable Internet subscribers into frenzied anticipation. But Netizens content with 3 Mbps and unwilling to face exile in the form of dialup advise against buying into the uncap cable modem program, although DerEngel reportedly insists OneStep is legit. DerEngel also plans to provide disclaimers and warning statements for those who want the mammoth 30 megabyte program.
OneStep is supposed to make uncapping safe, but many Netizens say to steer clear.
-ISP Monitoring of Cable Modem Uncapping
Your ISP and/or cable company monitors the network. If your neighbors hold an “uncap cable modem” party, the ISP can detect that your neighbors' bandwidth is above specified limits. The ISP can query the network to find your MAC address (not to be confused with Macintosh) and identify you as the source of the uncapping. In addition, many ISPs have modified the config file sent to the modem to detect when the cap is exceeded, at which point the modem shuts down. No matter how clever the uncapping machine or cable modem uncapper, the ISP can still catch you.
Legally Uncap Cable Modems?
If you're thinking about uncapping your cable modem, especially if the modem cable with a cable Internet service provider, be warned. Your service agreement prohibits uncapping, removing software blocks that limit or “cap” bandwidth.
Uncap your cable modem and you will at the very least be banned from your ISP for life. In the case of subscribers who uncapped cable modems provided by Buckeye Cable of Ohio, the FBI seized the offenders' computer equipment, although reports suggest this may have been excessive punishment.
Some critics argue that the laws about cable modem uncapping are not clearly defined. But most of us would probably do well to avoid an uncapping machine or a cable modem uncapper.
-Cable Modem Uncapper
Uncapping cable modem tips:A cable modem uncapper is a program floating around the Internet that uncaps the bandwidth limits either included in your cable modem or programmed in by your cable Internet provider. It's available in a Zip file, but be advised that using this program to uncap cable modem equipment will at the very least get your ISP service terminated. Thanks to Docsis and to the cable company monitoring users' modems for bandwidth hogging, using the cable modem uncapper program is in the category of “use at your own risk,” much like an uncapping machine.
There are also other uncapping programs users have offered in internet forums, including links to sites devoted to cable modem hacks. Again, this is murky territory.
Uncapping Doesn't Work
Several uncap cable modem proponents will tell you that they've been able to coax ten times the bandwidth out of their cable modems since they've run a cable modem uncapper or used and uncapping machine.
However, most tech experts agree that uncapping doesn't work, except on older modems. Also, experts say the bandwidth limit is enforced at the head end, and there's no way around this design. In the event you do increase the cap, you have to reboot the cable modem to make the change permanent, but once you do, the modem will contact the head end computer and download the latest settings, including the speed limits, which are most likely the ones you just tried to bypass through uncapping.
Uncapping Tutorials
Like specs on how to create viruses or how to start your own MLM business, tutorials on “how to uncap cable modem” are abundant on the Internet.” They feed the perpetual motion uncapping machine started by a few hackers and cable subscribers dissatisfied with their cable Internet service.
Like cable modem uncapper programs, cable modem uncapping tutorials are questionable at best, illegal at worst. If you do some research online, you'll find that cable modem uncapping tutorials are usually posted by poor spellers in tech forums. Most cable modem users treat them with about the same credibility as junk e-mail advertising.

Sunday, June 21, 2009

How to print webpage without backgrounds?

You can prints out any webpage with its background colors and with out background colors using Internet Explorer setting. Generally Internet Explorer setting "Print background colors and images" is disable, if you print webpage without background colors, then you can speed up your printing and save printer ink. But important thing to always preview WebPages before you print, in Internet Explorer go to File menu, then click on Print Preview option.

To enable or disable print background colors option, open your system Internet Explorer.

-Click the Tools menu and then go to Internet Options and open it. Here click the Advanced tab then scroll down to find the option Printing section.

-Now check the option "Print background colors and images" then Apply and ok.

Saturday, June 20, 2009

Turn on shortcut to screensaver

-You can run screensaver on your system with a single click, If you have any screensaver file like .scr extension, or first download it using Internet, there are many free sites for screensaver downloading.

-If you have not any .scr file then please go to Start button, and click on Search button. Here in search windows type *.scr and search all screen saver file from your hard disk.

-Here you will find a list of screensavers in the results. Pick a screensaver you want. You can preview it by double-clicking it.

-Right click on the file, choose Send To, and then click Desktop (create shortcut).

-To activate the screensaver, double-click the icon on your desktop.

Thursday, June 18, 2009

Be Careful with Attachments

There have been a number of really bad viruses just within the past 6 months. We've seen the W32.Beagle, W32.Netsky, MyDoom, and so on. Most of these viruses were transported or replicated from pc to pc-using email attachments. These are easy to spot if you're paying attention, simply because they are usually executable files, but not always.
Some attachments contain Macros (simple programs that run within other programs, all the titles in Microsoft Office use macros). If you're not that familiar with spotting file extensions, don't worry, that's what I'm here to talk about today. If you are a little hazy on the whole "file extension" thing then let's spend a few moments explaining it.
File extensions are what tell the program how to treat a particular piece of data. For example, most people are somewhat familiar with .doc or a .txt file extensions these are both text documents and when the user opens this file the Operating System looks at this extension and then knows how to open it.
Hackers try to use some sort of eye-grabbing ploy to get you to open their email and activate the virus, which is always an attachment. Most Anti-virus nowadays stops, or at least warns, you of these high risk attachments and even take measures to protect you. However, on the average 10-15 new viruses are created every day and I personally wouldn't count on any program to 100% protect my pc. That's why I scrutinize any email, if I wasn't expecting an attachment, I won't open it until I had a chance to talk to the sender.
Some of the more common file types used to hide viruses include:
.scr - Windows Screen Saver - USE CAUTION if you receive a screen saver via email. They can contain worms or viruses .pif - DO NOT OPEN! This is most likely a virus. Clicking it will run a program or code that can mess up your computer. .exe - executable file - a program that contains a virus, Trojan horse, or worm .pps - MS PowerPoint (can contain macro virus) .zip - Zip (compressed) file .vbs - Visual Basic script .bat - Executable MS-DOS batch file .com - DOS executable command .asp - active server page - internet script .doc - Word document (can contain macro virus) .xls - Excel file (can contain macro virus)
This is in no way a complete list. Just because an attachment may have one of these extensions doesn't mean that it is a virus, but it should send up warning flags. Hackers use clever subject lines, and viruses can appear to come from a friend so keep on your toes and don't fall victim to their deceptive traps. Scan those attachments and verify with the sender before opening.

How to enable the advance performance setting in windows vista?

If you have noticed that the speed of your system is very slow with windows vista then today tip is very useful for you to increase the performance of windows vista. There is some default setting in vista which is used to manage the write caching on disk. By default windows enabled the write caching on disk but the advanced performance setting is disabled.
Follow the given steps to configure the advance performance setting in Windows Vista:
To enable this feature, you will need to be logged into your computer with administrative rights.

-First right click on My Computer icon then select the option Manage.

-Here small windows will appear with title Computer Management, now select the Device Manager option, then locate the SATA Disk under the Disk Drives.

-Here select the enable advanced performance sittings on the SATA disk.

-Now click on Ok button to apply the setting and restart your computer after any changes to go into effect.